Specifications
ITEM | UNIT | TL-700 |
Controller | - | Fanuc 0i-MF |
- | - | |
- | Mitsubishi M70A | |
Spindle driven type | - | Direct |
Spindle speed | rpm | 10,000 |
Spindle taper | - | BT-30 |
Spindle drive motor | kw | 3.7/5.5 |
Spindle to worktable | mm | 180-530 |
X-axis travel | mm | 710 |
Y-axis travel | mm | 420 |
Z-axis travel | mm | 350 |
Cutting feed rate | m/min | 10 |
Rapid feed rate | m/min | 48 |
3-axis guide width (X/Y/Z) | mm | 25/25/30 |
Screw diameter/thread | mm | 25/25/36 |
Surface (LxW) | mm | 850x420 |
T-slot (QTYxWxD) | mm | 3x14x100 |
Maximum workpiece load | kg | 250 |
Tool changer | type | Front |
Tool magazine capacity | pcs | BT-30/16T |
Tool selection | - | Two-way |
Maximum tool length | mm | 200 |
Tool diameter | mm | φ90 |
Maximum tool load | kg | 3 |
Pull stud | degree | 45 (90) |
Chip conveyor | - | OPT |
Electricity power | voltage | 220V |
Floor space (LxWxH) | mm | 2136x2540x2435 |
Net weight | kg | 2,900 |